Ferrari Life Forum banner

Will 360 OEM wheels fit on F355 or 348 ?

F355 
5K views 4 replies 4 participants last post by  bikz 
#1 ·
Guys, I'm trying to figure out if the factory 360 wheels can be fitted directly on F355 / 348 or any other Ferrari models (456 etc)? Thanks for your help.
 
#2 ·
360 wheels are too narrow for any of the 65 degree V12s (456 and later). Looks like they would fit on an early 348 with spacers F&R, on a late 348 with F spacers, and on an F355 with R spacers. Judge for yourself from the specs below.



5 X 108 mm Bolt Pattern


Testarossa

Five Spoke 16”, 5 X 108 mm
Front 8J x 16 ET 34.2 mm, Rear 10J x 16 ET 59.6 mm

512 TR/F512M

Five Spoke 18”, 5 X 108 mm
Front 8J x 18 ET 46 mm, Rear 10.5J X 18 ET 81.75 mm

348

Five Spoke 17” Early, 5 X 108 mm
Front 7.5J X 17 ET 49 mm, Rear 9J X 17 ET 68 mm
Five Spoke 17” Late, 5 X 108 mm
Front 7.5J X 17 ET 49 mm, Rear 9J X 17 ET 43.05 mm

355

Five Spoke 18”, 5 X 108 mm
Front 7.5J X 18 ET 32 mm, Rear 10J X 18 ET 77.9 mm

456 GT/456M

Five Spoke 17”, 5 X 108 mm
Front 8.5J X 17 ET 50 mm, Rear 10J X 17 ET 24.6mm

360

Five Spoke and Modular 18”, 5 X 108 mm
Front 7.5J X 18 ET 31.5 mm, Rear 10J X 18 ET 38.95 mm

360 Challenge

Challenge Monolithic 18”, 5 X 108 mm
Front 8J X 18 ET 31.5 mm, Rear 10.5J X 18 ET 39.95 mm

360 Challenge Stradale

Challenge Monolithic 19”, 5 X 108 mm
Front 7.5J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm

550/575M/Superamerica

550/575M Five Spoke/Modular 18”, 5 X 108 mm
Front 8.5J X 18 ET 43.65 mm, Rear 10.5J X 18 ET 32 mm
575M/575 Superamerica Five Spoke Modular 19”, 5 X 108 mm
Front 8.5J X 19 ET 43.6 mm, Rear 10.5J X 19 ET 32 mm

F430

Five (Ten) Spoke, Challenge Monolithic, Scuderia Style 19”, 5 X 108 mm
Front 7.5J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm

Scuderia/16M

10 Spoke, Five Spoke 19”, 5 X 108 mm
Front 8J X 19 ET 31.5 mm, Rear 10J X 19 ET 39 mm
 
#3 · (Edited)
If you look at my profile pic you can see how 550 wheels look on a 348. They did tequire about 10 mm machined off the mounting pad to look really right. Unmachined they stick out a little to far . I've even had a judge at a concourse car show admit they arent stock buy they look great on the car , and deducted no points for them. Doesnt answer your question about 360 wheels , just presenting another option. ++++ they can be bought new for a reasonable price and are wide , if i recall 8.5 and 10.5. You can get some nice meaty tires . . And from the rear and 3/4 view they eliminate a little awkward look of the stock wheels , the 348 has a wide rear and imho needed wider wheels from the start, these fatties really fill the wheel wells
 
#4 ·
Different problem. He was trying to sell his 360 wheels.

He received all kinds of varying degrees of usefulness answers on the other site.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top