Ferrari Life - View Profile: tazandjan
Owner
Elite Member

tazandjan tazandjan is online now

  Visitor Messages

Showing Visitor Messages 91 to 100 of 194
  1. tazandjan
    04-04-2013 08:04 PM - permalink
    tazandjan
    Mark- Unfortunately that is too down in the weeds for me on the clutch. You do have to have an SD2 to reset PIS and zero out some of the wear data. If you give me your e-mail address, I will look in the 575M WSM and see what it says about assembly.
  2. MARK 575
    04-04-2013 03:04 PM - permalink
    MARK 575
    Also, do I need to reset the PIS sys. before driving it? or can we have the Ferrari dealer reset that after we finish the work?

    Sorry for so many questions! And I greatly appreciate any ifo you have. Thank you so much!!! Mark
  3. MARK 575
    04-04-2013 03:03 PM - permalink
    MARK 575
    Taz-

    Hi may name is Mark and I am new here. I know I may be asking alot here, but it sounds as if you are very knowledgeable on the 575's and I was wondering if you could possibly help me out. My best friend owns a 575 Maranello w/ the F1 gearbox. I own a shop in Boulder CO. We specialize in German cars but Jess (my buddy who owns the Ferrari) wanted me to do the clutch in the 575. Long story short- Dave @ Scuderia Rompante said he would help me with the set-up and adjustment necessary after replacing the clutch, but is no longer interested in helping. I have the clutch out of the car and just need the info on what adjustments are necessary before re-assembly. Can you possibly help me? It looks to me that the input shaft is threaded with jam nuts and that would be where you set your end-play when replacing the clutch. Is this correct? Do you know the specs here? Are there any other adjustments necessary before re-assembly? -I will send the rest in next message...
  4. tazandjan
    03-18-2013 09:54 AM - permalink
    tazandjan
    David- What part of the center console are you missing?
  5. David575M
    03-18-2013 07:43 AM - permalink
    David575M
    Taz, where do I find a console for 575, you have helped with all my other questions.
    Regards
  6. tazandjan
    02-28-2013 04:04 PM - permalink
    tazandjan
    Not me. Cannot be done as far as I know.

    Taz
  7. mcmarko23
    02-28-2013 10:16 AM - permalink
    mcmarko23
    hi, i've read few of your posts and you said that it's possible to transform a 360 key (with fob) to a f430 key.
    Could you please post a link to that post ?

    Thanks in advance
  8. tazandjan
    02-23-2013 07:55 AM - permalink
    tazandjan
    You can buy a copy from Ricambi for $125.
  9. Askgold
    02-23-2013 05:07 AM - permalink
    Askgold
    Is the offer to get a copy of the 575 workshop manual still standing? If so would greatly appreciated it.....
  10. tazandjan
    01-15-2013 02:02 PM - permalink
    tazandjan
    Only disadvantage is cost. Other than that, they have been great. When first installed, it takes a little more pressure to generate braking force, but does not take long and the pressure required is back to normal. Feels like you have a bottomless pit of braking. So far only fronts installed, rears are prototype installation and still being developed.

  About Me

  • About tazandjan
    Name
    Terry H Phillips
    Biography
    Retired F-111 WSO
    Location
    Albuquerque, NM
    Interests
    Fly Fishing, WW-I Aviation
    Occupation
    Rocket Scientist
    My Ferrari(s)
    2004 575M 135171
    My Other Cars
    Mercedes GL 550
    Past 308 GTS 25125
    Past 365 GTB/4 14009
    Past Dino 246GT 02984
  • Signature
    Taz
    Terry Phillips

    Present: 575M 135171
    Past: Dino 246 GT 02984, 365 GTB/4 14009, 308 GTS 25125

    Every day I look around, and if nobody is shooting at me, it is a pretty good day.

  Statistics

Total Posts
Visitor Messages
Wiki
General Information
  • Last Activity: Today 08:53 AM
  • Join Date: 08-13-2011
  • Referrals: 4

  Friends

Showing Friends 1 to 10 of 31

  Mentions

08-14-2017
05:42 AM - garyjpaterson mentioned tazandjan in post 550 Technical Info Request
...on this forum from @tazandjan - can anyone clarify...

  Quotes

10-07-2015
08:41 AM - dave rocks quoted tazandjan in post Engine oil analysis
Ferrari updated the guides on ...
04:54 AM - tifosi_ quoted tazandjan in post 550 FHP springs and anti-roll bar kit
550 and 575M FHP springs and r...
04:50 AM - dave rocks quoted tazandjan in post Engine oil analysis
Easy to see if it's guides wit...
10-06-2015
11:29 PM - cribbj quoted tazandjan in post 550 FHP springs and anti-roll bar kit
Contact jcribb (John Cribb). ...
09-29-2015
08:42 AM - Bluebottle quoted tazandjan in post Due belle Italiani, or boy with new toy syndrome
Looks ready to eat something. ...
09-27-2015
05:21 PM - Ferrari Nube quoted tazandjan in post Sluggish Cold Starts
FN- I would not let someone wh...
09-26-2015
05:19 AM - JazzyO quoted tazandjan in post Liking the new FerrariLife look
Onno- You can pay with a credi...
09-25-2015
07:52 AM - ferrariadmin quoted tazandjan in post New site look and software upgrade Feedback Thread
Drag and drop does not work wi...
 
For the best viewing experience please update your browser to Google Chrome
Copyright 2012 ONE Media, Inc.
FerrariLife is independently run with no affiliation with Ferrari SpA
Ferrari for Sale | Maserati for Sale