tazandjan tazandjan is offline

Olivio- The sources I know about have dried up, so no sure what to recommend.

Hello Terry,

I am not very active on the forum but will be owning a 575 Fiorano Handling Pack very soon. May I ask you if you have a copy of the WSM for the 575 or at least point me to the right direction where these are being stored on the net (apart the old ferraridatabase site which seems dead now..) ?

Thanks a lot in advance !

Hi Sir Tazandjan: I am new to being active in Ferrari Life. I am currently stuck on the removal of the interior door switches to resurface the sticky parts. I have the arm rest covers off but I can't loosen both 7 mm bolts. I have used a vice grip to hold the rod but I can only get one of the 7mm loosened -the 7mm nearest the door mechanism just won't move and I am afraid I will break something if I put more torque . I have been successful removing and reinstalling the sticky parts on the transmission tunnel to include the 7 control switches above the radio. Any suggestions? I purchased the 550 new in 2001 in Germany and spent many hours enjoying the car on the last frontier (Germany). I am now back in Cape Coral, FL I am struggling trying to follow threads but I will continue looking for tidbits on my 550. Somewhere I saw there is a replacement siren/battery for my car other then the factory part but where to buy Thanks. Oscar

You can buy a copy of the 575M WSM from Ricambi. Either Daniel or Mike should be able to help you. $125.

Morning. I would love a copy of the 575 workshop manual!
[email protected]

John is on travel quite a bit, so probably he has not seen it yet. If you have not heard back in a couple of days, let me know and I will PM you his personal e-mail.

Hello Terry,

my name is Gus Malezis and recently joined the forum, and have a Maranello 550.

I am interested in cribbj/John's conversion kit and have emailed him but have not been gotten a response.

Apologies for reaching out to you on this - but you are very knowledgeable on the various threads and thought I'd ask if you know where I can source the COP conversion.

thanks in advance for anything you might be able to suggest.
gus

We think it was in Europe, but nobody can find any information on that particular 456M. We think it may have Novitec mods, but even Novitec could not confirm.

Dear Tazandjan,

You posted in this subject : http://www.ferrarilife.com/forums/mo...st-456m-2.html a picture of 456 MGT with 19 inch Modulars.
The black in the front of a big gate.
You also say that this car was owned by a friend.

This car was in USA or Europe ?
I bought a very similar car (same color, rim) in France last year and looking for historical informations.

Thanks a lot

Greg

George- I will send you the document I wrote on programming the Alarm ECU to accept new fobs. You can probably pull a few questions out of it.

What e-mail do you want me to use? None on your website for ECU Doctors.