Gcalo Gcalo is offline

Hey Gcalo,

awhile back I found an image of yours https://www.ferrarilife.com/forums/a...-interior.jpeg

Anyhow I was curious about where you were able to get the screen instead of climate controls. Your image is the only one I've been able to find regarding it.

Greg. How you doing. Still have the beauty?

rik and beaux granucci

Dear Sir,

I have a F355 GTS with both a red and a black Fob. I do not have the pin code, and I would like to ask if you can provide me with a replacement black fob. I can send you my black or red fob which are both functional.

Can you let me know the cost? its European spec car.
Thank you
Haris

Hello, Sir. Since the thread on fob programming is from 2009 I thought it best to send you a note asking whether you can still program a Porsche fob using my working black Ferrari 550 fob?

Best Regards,

~Troyce
Titusville FL USA

Can you send us the PDF for changing the oil on a Ferrari 360 as you posted to [email protected]

Thank you so much

Hi, My name is Andrew. I have a customer that needs at least one back up remote for his 03 360. Do you have any remotes, can you clone 1 or 2, when can you do it, and how much would it cost? Thanks for your quick reply. P.S. I have the money to do this right away. thanks

Andrew

Please send PD F on the transmission fluid change and if you can get the on for the coolant also thanks, send to jg15green @verizon.net
Also found a big problem with ALL the hose clamps, the one at the oil res was leaking partly they are the wrong ones they do not allow for expand and contract with hot and cold and they cut into the hoses because of this I did a lot of research to find the correct ones,they are made by IDEAL called FLEX-GEAR hose clamp all SS part # 47010 at 10-15 bucks. also there is a potently problem at the manifold where the throttle body boot connect on to the motor the clamp is fixed size so as the boot expands and contract there will be a vacuum leak and a loss of power ,I have not be able to find the new replacement yet becuse the clamp is narrow and has to fit in that grove

Hi Gcalo, do you still clone black remote for 360? Thanks

Hey Gcalo I have a set of mim speedlines the 331 type I need a center cap do you know where I can get one

John

I just saw this post. Very sorry for the delay. I have been very busya nd not on the site lately.

Use the clamps you want. Don't worry about decreased value. You should be concerned about good maintenance.

regards

Greg Calo