This is the finished product. As you can see it was not easy to get the old shields off.
I used a soft plastic scraper to lift one corner then slowly jammed other soft tools in to break seal on the 2 sided sticky tape. I then used black insulation tape to put the new ones on. It would be easier to use a 2 sided tape as it allows you to get the correct placement position.
I hope you agree with the colour scheme we chose the effect of the Carbon Shields is best.
Note the black turning signal lenses we also fitted below the Shields and the C/F small Shield on the door sill.
Last edited by Firanobob; 01-21-2013 at 05:10 PM.
Reason: added more comment