360 front needed

illuder · 01-27-2012, 06:19 PM

Hi

Can you suggest to me a place where I can get a whole front for my damaged 360? See pictures below, i need 2 front wheels, and everything attached to it, front bumper, lights etc. Also need drivers and passenger airbags, seatbelt tensioners, windscreen, right door.

I think my most likely bet is to get a salvage 360 with rear damage and take everything form the front, as i fear getting piece by piece in front will cost too much.

Where can I see diagrams on all the parts which fit in front?

Please try to assist me, it will be appreciated tx...

Killer58 · 01-27-2012, 06:34 PM

Sadly, I think your best option is to get another 360. From the looks of it, your car is too far gone to economically salvage.

Ricambi, a sponsor here, can give you an estimate of the parts you'll need.

a1exander · 01-27-2012, 09:16 PM

@illuder did you buy this car as a Code3 recently?
Would you be in a position to give me the registration number?

This car looks awful similar to the Krugersdorp crash so I was just wondering?
Apparently the chassis had bent and the floor was torn when the right front wheel entered the drivers compartment.

The insurance determined that the car was not worth repairing and they paid out the previous owner roughly 1 week ago.

Boxer · 01-27-2012, 09:17 PM

Eurospares in the UK might be able to provide most of what you need off a 360 with rear damage.

Have you checked the chassis alignment? If it is bent then I would not try to put this one back together. If it is straight, then the project might be viable.

illuder · 01-27-2012, 09:55 PM

At Alex
yes, it's the same one. You can call me if you want more info. 0836348050

illuder · 01-27-2012, 09:56 PM

Quote:

Originally Posted by Boxer

Eurospares in the UK might be able to provide most of what you need off a 360 with rear damage.

Have you checked the chassis alignment? If it is bent then I would not try to put this one back together. If it is straight, then the project might be viable.

I have contacted them, Jamie says he can't help at the moment?!

Boxer · 01-27-2012, 11:39 PM

Quote:

Originally Posted by illuder

I have contacted them, Jamie says he can't help at the moment?!

Might also try Douglas Valley Breakers.

a1exander · 01-28-2012, 07:45 PM

@illuder
The only panel shop that will be able to pull that car straight is likely to be Rosso Sport Auto.
They have the Ferrari jigs and more importantly the expertise.

reggazz312t · 01-29-2012, 06:12 PM

Kudo"s,I respect you for taking a cool piece of "junk" and making it rip again.Keep it cheap and remember how Bert and mk e do things and get it on. Compilments on your choice of wrecks,if I was 20yrs old I would go the same route,keep us posted and be always resourcefull and tight on the pocketbook,FORZA,regga

01-27-2012, 06:19 PM	#1
illuder Join Date: Dec 2005 Location: South Africa Ferrari Life Posts: 24	360 front needed Hi Can you suggest to me a place where I can get a whole front for my damaged 360? See pictures below, i need 2 front wheels, and everything attached to it, front bumper, lights etc. Also need drivers and passenger airbags, seatbelt tensioners, windscreen, right door. I think my most likely bet is to get a salvage 360 with rear damage and take everything form the front, as i fear getting piece by piece in front will cost too much. Where can I see diagrams on all the parts which fit in front? Please try to assist me, it will be appreciated tx... Some past projects: 1990 BMW 325is custom kit ~ 1999 BMW 528i, custom M5 kit ~ 2000 BMW 318i, hamann custom kit ~ 2001 BMW 320i custom kit, quad exhaust,custom alloys & lights ~ 2001 Toyota Tazz custom kit ~ 2003 Mercedes CLK AMG ~ IRA360-80% Complete ~ Extreme 360- Current

01-27-2012, 06:34 PM	#2
Killer58 Owner Elite Member Join Date: May 2010 Ferrari Life Posts: 1,419 Name: David	Sadly, I think your best option is to get another 360. From the looks of it, your car is too far gone to economically salvage. Ricambi, a sponsor here, can give you an estimate of the parts you'll need. Of all the narcissists I know, I love me the most.

01-27-2012, 09:17 PM	#4
Boxer Owner Elite Member Join Date: Apr 2004 Location: UK Ferrari Life Posts: 12,793	Eurospares in the UK might be able to provide most of what you need off a 360 with rear damage. Have you checked the chassis alignment? If it is bent then I would not try to put this one back together. If it is straight, then the project might be viable. Boxer Current: F40, F50, 612, 430 Scuderia Past: 360 Modena, 360 Challenge, 550, 575, 365BB, 512BB, 456 GT, F355 GTS, 365 GTB/4 Daytona, 308 GTB

01-27-2012, 09:55 PM	#5
illuder Join Date: Dec 2005 Location: South Africa Ferrari Life Posts: 24	At Alex yes, it's the same one. You can call me if you want more info. 0836348050 Some past projects: 1990 BMW 325is custom kit ~ 1999 BMW 528i, custom M5 kit ~ 2000 BMW 318i, hamann custom kit ~ 2001 BMW 320i custom kit, quad exhaust,custom alloys & lights ~ 2001 Toyota Tazz custom kit ~ 2003 Mercedes CLK AMG ~ IRA360-80% Complete ~ Extreme 360- Current

01-29-2012, 06:12 PM	#9
reggazz312t Owner Join Date: Jul 2011 Location: near austin texas Ferrari Life Posts: 83	Any frame machine mechanic can pull that spagetti Kudo"s,I respect you for taking a cool piece of "junk" and making it rip again.Keep it cheap and remember how Bert and mk e do things and get it on. Compilments on your choice of wrecks,if I was 20yrs old I would go the same route,keep us posted and be always resourcefull and tight on the pocketbook,FORZA,regga

01-27-2012, 09:16 PM	#3
a1exander Owner Elite Member Join Date: Jul 2010 Location: Johannesburg RSA Ferrari Life Posts: 768 Name: Peter	@illuder did you buy this car as a Code3 recently? Would you be in a position to give me the registration number? This car looks awful similar to the Krugersdorp crash so I was just wondering? Apparently the chassis had bent and the floor was torn when the right front wheel entered the drivers compartment. The insurance determined that the car was not worth repairing and they paid out the previous owner roughly 1 week ago.

01-28-2012, 07:45 PM	#8
a1exander Owner Elite Member Join Date: Jul 2010 Location: Johannesburg RSA Ferrari Life Posts: 768 Name: Peter	@illuder The only panel shop that will be able to pull that car straight is likely to be Rosso Sport Auto. They have the Ferrari jigs and more importantly the expertise.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode