im looking for some 19" aftermarket alloys for my 360.

360 · 03-21-2010, 12:02 PM

hi guys havent been on here for a while. im looking to purchase some 19" alloys for my 360 modena, just wanted a change over summer

. does anybody have any recommendations pls?

Gcalo · 03-22-2010, 08:27 AM

That question opens a can of worms but I would recommend you look at 8.5" front and 11" rears so you have a greater selection of tire choices.

Imola makes a beautiful set of rims (first ones pictured), the OEM Challenge rims are very nice but delicate (2nd ones pictured) , and HRE of course makes excellent rims. These are 890R's brushed centers (3rd set featured).

There are many others but you have to be careful as I believe there can be some very ridiculous wheels!

I think all three of these present very good possibilities.

360 · 03-22-2010, 03:50 PM

thanks Gcalo they are nice wheels.. i have seen these 19" alloys a guy is selling there not actually on the car as you see on the 430 its just illustration purposes. the wheel size is as below. do you know if they will fit the 360?? the seller tells me they will fit but i have asked a wheel supplier and he tells me they will NOT because the ofset is different and i might require spacers which i do NOT want to put on my car maybe due to handling. what are your thoughts will they fit straight on??

http://cgi.ebay.co.uk/FERRARI-430-55...item35a80d2a39

-- Rim Width: 11J
-- Rim Diameter: 19 inches
-- Number of Studs: 5
-- Stud Diameter: 108
-- ofset: 50

Gcalo · 03-22-2010, 08:49 PM

Those are nice wheels as well. I have seen them before. Believe they are made in England.

Those should bolt right up to your 360.

Front offset should be about 25-28 mm and the rears 48-52.

So these look to be fine.

You should not need spacers.

Boxer · 03-22-2010, 10:47 PM

Quote:

Originally Posted by 360

hi guys havent been on here for a while. im looking to purchase some 19" alloys for my 360 modena, just wanted a change over summer

. does anybody have any recommendations pls?

Only ones I would consider are the BBS 19" rims.

alan g · 03-31-2010, 04:17 PM

I have a set of 19" Savini wheels I am looking to sell. You can view them on the Savini website. They are model SV2. If you are interested I can send you pictures of them on my car.

Gcalo · 03-31-2010, 04:28 PM

I am not too keen on those but someone might be.

03-21-2010, 12:02 PM	#1
360 Owner Join Date: Dec 2008 Ferrari Life Posts: 11	im looking for some 19" aftermarket alloys for my 360. hi guys havent been on here for a while. im looking to purchase some 19" alloys for my 360 modena, just wanted a change over summer . does anybody have any recommendations pls?

03-22-2010, 08:27 AM	#2
Gcalo Owner Join Date: Feb 2006 Location: San Ramon, Calif Ferrari Life Posts: 3,613	That question opens a can of worms but I would recommend you look at 8.5" front and 11" rears so you have a greater selection of tire choices. Imola makes a beautiful set of rims (first ones pictured), the OEM Challenge rims are very nice but delicate (2nd ones pictured) , and HRE of course makes excellent rims. These are 890R's brushed centers (3rd set featured). There are many others but you have to be careful as I believe there can be some very ridiculous wheels! I think all three of these present very good possibilities. Attached Images Last edited by Gcalo; 03-22-2010 at 08:40 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2010, 03:50 PM	#3
360 Owner Join Date: Dec 2008 Ferrari Life Posts: 11	thanks Gcalo they are nice wheels.. i have seen these 19" alloys a guy is selling there not actually on the car as you see on the 430 its just illustration purposes. the wheel size is as below. do you know if they will fit the 360?? the seller tells me they will fit but i have asked a wheel supplier and he tells me they will NOT because the ofset is different and i might require spacers which i do NOT want to put on my car maybe due to handling. what are your thoughts will they fit straight on?? http://cgi.ebay.co.uk/FERRARI-430-55...item35a80d2a39 -- Rim Width: 11J -- Rim Diameter: 19 inches -- Number of Studs: 5 -- Stud Diameter: 108 -- ofset: 50

03-22-2010, 08:49 PM	#4
Gcalo Owner Join Date: Feb 2006 Location: San Ramon, Calif Ferrari Life Posts: 3,613	Those are nice wheels as well. I have seen them before. Believe they are made in England. Those should bolt right up to your 360. Front offset should be about 25-28 mm and the rears 48-52. So these look to be fine. You should not need spacers.

03-31-2010, 04:17 PM	#6
alan g Owner Join Date: Feb 2009 Location: Port Washington, NY Ferrari Life Posts: 32	I have a set of 19" Savini wheels I am looking to sell. You can view them on the Savini website. They are model SV2. If you are interested I can send you pictures of them on my car.

03-31-2010, 04:28 PM	#7
Gcalo Owner Join Date: Feb 2006 Location: San Ramon, Calif Ferrari Life Posts: 3,613	I am not too keen on those but someone might be.