Mondial QV/3.2 exhaust heat shields

afterburner · 07-19-2009, 10:10 PM

Hi Fellow Mondial QV/3.2 owners

My car lacks the 2 aluminium heat shields as marked in red on the drawing below.
Does anyone, by any chance, have them removed (especially #17 below the injection system... living in a hot country)
If so, could you post the outlines with some measurements/cross sections and angles so I can make them?

Thank you for your efforts!

afterburner · 10-05-2009, 10:23 PM

The angled part is a a 3 layer heatshield protecting the fuel distributor and intake air from the exhaust heat below, and also shielding the trunk a little.
The curved part is a 1 layer airguide directing air to the diff and slightly shielding the diff from a the exhaust cross pipe.

afterburner · 10-05-2009, 10:40 PM

Here the airguide information and pictures: It is mounted with spacers slightly below the level of the gearbox sump so it can catch some cool air to direct upwards, ventilating the diff zone.

afterburner · 10-05-2009, 10:47 PM

Here the info for the injection system heatshield. It is an aluminum - headprotection - aluminum sandwich.

Boxer · 10-06-2009, 12:24 AM

Are they no longer available from Maranello Parts?

afterburner · 10-06-2009, 01:03 AM

I sure they are available somewhere but certainly rather expensive, plus the shipping. Fabricating them myself was interesting, and also part of owning a classic :-)

Boxer · 10-07-2009, 09:53 PM

Quote:

Originally Posted by urs.stemmler

I sure they are available somewhere but certainly rather expensive, plus the shipping. Fabricating them myself was interesting, and also part of owning a classic :-)

+1. wish I had that skill.

10-05-2009, 10:23 PM	#2
afterburner Owner Join Date: Mar 2007 Location: HK Ferrari Life Posts: 11	The angled part is a a 3 layer heatshield protecting the fuel distributor and intake air from the exhaust heat below, and also shielding the trunk a little. The curved part is a 1 layer airguide directing air to the diff and slightly shielding the diff from a the exhaust cross pipe. Attached Images

10-05-2009, 10:40 PM	#3
afterburner Owner Join Date: Mar 2007 Location: HK Ferrari Life Posts: 11	Here the airguide information and pictures: It is mounted with spacers slightly below the level of the gearbox sump so it can catch some cool air to direct upwards, ventilating the diff zone. Attached Images

10-05-2009, 10:47 PM	#4
afterburner Owner Join Date: Mar 2007 Location: HK Ferrari Life Posts: 11	Here the info for the injection system heatshield. It is an aluminum - headprotection - aluminum sandwich. Attached Images

10-06-2009, 12:24 AM	#5
Boxer Owner Elite Member Join Date: Apr 2004 Location: UK Ferrari Life Posts: 12,730	Are they no longer available from Maranello Parts? Boxer Current: F40, F50, 612, 430 Scuderia Past: 360 Modena, 360 Challenge, 550, 575, 365BB, 512BB, 456 GT, F355 GTS, 365 GTB/4 Daytona, 308 GTB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-19-2009, 10:10 PM	#1
afterburner Owner Join Date: Mar 2007 Location: HK Ferrari Life Posts: 11	Mondial QV/3.2 exhaust heat shields Hi Fellow Mondial QV/3.2 owners My car lacks the 2 aluminium heat shields as marked in red on the drawing below. Does anyone, by any chance, have them removed (especially #17 below the injection system... living in a hot country) If so, could you post the outlines with some measurements/cross sections and angles so I can make them? Thank you for your efforts! Attached Images

10-06-2009, 01:03 AM	#6
afterburner Owner Join Date: Mar 2007 Location: HK Ferrari Life Posts: 11	I sure they are available somewhere but certainly rather expensive, plus the shipping. Fabricating them myself was interesting, and also part of owning a classic :-)